Home > News

Common UV Printer Coating

Sep 16 , 2019

Find here details of Mild Solvent Ink on our website. Today we would like to talk about common UV printer coating.

Mild Solvent Ink

Mild Solvent Inkb

Coating classification:

Inorganic and organic materials are two types of consumables. Metal, crystal, marble, jade, etc. are inorganic substances; plastics, wood products, bamboo products, leather, etc. are organic substances.

The following points are shared by professional Desktop PVC Smart Card Printer Manufacturer:

1. UV printer - glass coating:

Applicable to plexiglass, tempered glass, ceramics, ceramic tiles, crystal, special treatment is required, both transparent and white, both can be used for bright and matte effects. (Crystal is an inorganic consumable, so it is treated with a strengthening agent and a coating after it is treated. The reinforcing agent and the coating are made by foaming. The strengthening agent should be completely dried and then coated, because in the strengthening agent Coating without drying before will make the crystal color yellow, which will also affect the ink absorption. The curing agent is dried in a room temperature ventilated environment for 120 minutes, and the coating is dried under the above conditions for 120 minutes. Suggestion: The fortifier should be naturally dry, and the coating needs to be heated for about 20 minutes. When the crystal is soaked, let the crystal surface of the bubble completely contact with the reagent surface. After the contact, the crystal is vertically taken up and the reagent flows down at the nearest distance. Then use a paper towel to absorb the reagents accumulated on the edge. If there is dust, use a toothpick to pick out the dust. Remember that the pick is not scratched, otherwise it will leave unsightly traces. Please do not put the crystal in the indoor environment. It is placed in the oven to help dry the coating and prevent dust from falling on the crystal.

Resistance to boiling water requires a little higher, usually with white oil, adhesion is very important, white oil should not be too strong, otherwise it is easy to dissolve the pattern, preferably spray twice. )

2. UV printer - PC coating

Some PC materials are harder and usually have poor adhesion! Some PC materials print directly without coating! Generally good quality PC material is relatively hard (applicable to P\PP\PVC and other P-type beginning materials)

3. UV printer - metal coating

CP metal: features fast drying, spray requirements, thick surface, otherwise easy to fall

DY metal: ceramic, slower drying than CP: suitable for aluminum, copper, tinplate, aluminum alloy and other materials can also be used in ceramic tiles, tempered glass, special treatment is required, respectively, transparent and white, can do Bright and matte effects. Mainly the smoothness of the surface, such as ceramic smoother than glass, use DY.

If you need any information about Mimaki Solvent Ink, feel free to contact us.