• 耗材优惠套装,最高节省40%
 
   

Resetter For Canon Printhead PF-03, PF-04, PF-05

Resetter For Canon Printhead PF-03, PF-04, PF-05
Resetter For Canon Printhead PF-03, PF-04, PF-05
  • product details
Resetter For Canon Printhead PF-03, PF-04, PF-05
 

What can it do ?

1>    It can make different printer heads exchange for each other.

2>    Can change print head model, like reset PF-05 or PF-04 to PF-03.

3>    After reset the print head data, you can install with other printers for use or test.

 

How to use?

1. Very easy. Put the print head on resetter (picture as below),Press the print head, then press the button beside.

the resetter light become red, After flashing into green means it reset successfully.

2. If the red light after flashing into red, then it not succeed.try to reset it again. after many times reset unsuccessful.

3. it means the print head with problem of electric circuit.you can check the print head with a "The print head electrical fault tester"

Need attention:

a.  About the model change: If you use PF-03 print head resetter, then no matter you put PF-03 PF-04 PF-05 IH-035 etc. they all become PF-03 print head after reset. equally plausible, If you use PF-05 print head resetter, then all printheads will become PF-05 print head after reset.

b. The resetter light doesn't work, There are several general condition:

1.Dead Battery,it use with 9V primary batteries, you can change it by youself.

2.connecting line is broken, you can open it and check,To repair welding

3. The print head short circuit, you can give up the print head, otherwise will hurt your printer.

4. Please note the resetter pins, Never touch them.when you put the printehad on resetter, press it lightly,don't press overexertion. Avoid circuit board fall off.